Asus P5LD2-C/IPAT - Manual (Page 69)

ASUS P5LD2-C/IPAT 4-13
Enhanced C1 [Enabled]
Allows you to enable or disable Inter CPU Enhanced Halt (C1E) function, a CPU
power-saving function in system halt state. When enable, the CPU core frequency
and voltage will be reduced during the system halt state to decrease power
consumption. Configuration options: [Disabled] [Enabled]
Intel TM [Enabled]
Allows you to enables or disables Intel ® CPU Thermal Monitor (TM) function, a
CPU overheating protection function. When enabled, the CPU core frequency and
voltage are reduced when the CPU overheats. Configuration options: [Disable]
[Enabled]
IDE Configuration
PATA Master Not Present
PATA Slave Not Present
SATA Port1 Not Present
SATA Port2 Not Present
SATA Port3 Not Present
SATA Port4 Not Present
IDE Controller [Enabled]
IDE mode [PATA-Primary,SATA-...]
Serial-ATA Port 1 [Enabled]
Serial-ATA Port 2 [Enabled]
Serial-ATA Port 3 [Enabled]
Serial-ATA Port 4 [Enabled]
Enable/Disable IDE
Controller
4.4.4 IDE Configuration
The items in this menu allow you to set or change the configurations for the IDE
devices installed in the system. Select an item then press if you wish to
configure the item.
IDE Controller [Enabled]
Allows you to enable or disable the onboard IDE controller.
\Configuration options: [Enabled] [Disabled]
IDE Mode [PATA-Primary, SATA-...]
Allows you to select the IDE mode.Configuration options: [SATA only-Primary/
Secondary (Non-combined, Legacy)] [SATA-Primary, PATA-Secondary (combined,
Legacy)] [PATA-Primary, SATA-Secondary (Combined, Legacy)] [PATA only-
Primary (Non-combined, Legacy)] [PATA-Primary, SATA-Ports 1,2,3,4 (Non-
combined, PATA-Legacy)]