Asus P5LD2-C/IPAT - Manual (Page 43)

ASUS P5LD2-C/IPAT 2-23
7. USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports
are available for connecting USB 2.0/1.1 devices.
8. USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports
are available for connecting USB 2.0/1.1 devices.
9. Serial port (COM2). This port connects a modem, or other devices that
conform with serial specification.
10. Serial port (COM1). This port connects a modem, or other devices that
conform with serial specification.
11. PS/2 keyboard port (purple). This port is for a PS/2 keyboard.
2.7.2 Internal connectors
1. Floppy disk drive connector (34-1 pin FLOPPY)
This connector is for the provided floppy disk drive (FDD) signal cable. Insert
one end of the cable to this connector, then connect the other end to the
signal connector at the back of the floppy disk drive.
Pin 5 on the connector is removed to prevent incorrect cable connection when
using a FDD cable with a covered Pin 5.
Audio 2, 4, or 6-channel configuration
Port Headset
2-speaker
4-speaker 6-speaker
Light Blue Line In Surround Out Surround Out
Lime Line Out Front Speaker Out Front Speaker Out
Pink Mic In Mic In Center/Bass
P5LD2-C/IPAT
P5LD2-C/IPAT Floppy Disk Drive Connector
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
PIN 1
FLOPPY