Asus M5A88-M - Manual (Page 113)

ASUS M5A88-M 5-3
Chapter 5
Using the onboard graphics card
1. Right-click on the Windows ® desktop,
and then click ATI CATALYST(R)
Control Center from the shortcut menu.
The ATI CATALYST Control Center
screen appears.
2. Click Graphics Settings > CrossFire™,
then clear the Enable CrossFire™
check box. When a confirmation
message pops up, click Yes. The screen
blacks out for about one minute.
3. Click OK.
If you are using both an add-on and the on-board graphics cards at same time and want
to set the onboard graphics card as your main monitor, follow the instructions on the next
page.
4. Right-click on the Windows ® desktop,
then click Personalize from the shortcut
menu.
5. Click Display Settings. Select [Default
Monitor] on ATI Radeon HD 4250
Graphics, then select the check boxes
of This is my main monitor and
Extend the desktop onto this monitor.
Click OK, and then Yes from the
confirmation window.
6. Restart the system. Right-click on
the Windows ® desktop, then click ATI
CATALYST(R) Control Center from
the shortcut menu. The ATI CATALYST
Control Center screen appears.
7. Click Graphics Settings > CrossFire™, then select the Enable CrossFire™ check
box. When a confirmation pops up, click Yes. The screen blacks out for about one
minute.
8. Click OK. The onboard graphics card is set to be the main monitor.