Asus M5A88-M - Manual (Page 77)

ASUS M5A88-M 3-27
Chapter 3
3.6.5 USB Configuration
The items in this menu allow you to change the USB-related features. Select an item and
press to display the configuration options.
The USB Devices Enabled item shows the auto-detected values. If no USB device is
detected, the item shows None.
USB Functions [Enabled]
[Enabled] Enables the USB Host Controllers.
[Disabled] Disables the controllers.
The following items appear only when you set USB Support to [Enabled].
Legacy USB Support [Auto]
[Auto] Allows the system to detect the presence of USB devices at startup. If
detected, the USB controller legacy mode is enabled. If no USB device is
detected, the legacy USB support is disabled.
[Enabled] Enables the support for USB devices on legacy operating systems (OS).
[Disabled] Disables the function.
USB 2.0 Controller Mode [HiSpeed]
[FullSpeed] Sets the USB 2.0 controller mode to FullSpeed (12 Mbps).
[HiSpeed] Sets the USB 2.0 controller mode to HiSpeed (480 Mbps).
USB Configuration
Module Version - 2.24.5-13.4
USB Devices Enabled:
None
USB Functions [Enabled]
Legacy USB Support [Auto]
USB 2.0 Controller Mode [HiSpeed]
M5A88-M BIOS Setup
Advanced
Options
Disabled
Enabled
Version 0303
The following items only appear when a USB storage device is plugged in.
USB Mass Storage Device Configuration
USB Mass Storage Device Configuration
USB Mass Storage Reset Delay [20 Sec]
Device #1 Kingston DataTraveler
Emulation Type [Auto]
M5A88-M BIOS Setup
Advanced
Number of seconds
POST waits for the
USB mass storage
device after start
unit command.
Version 0303