Asus M5A88-M - Manual (Page 68)

3-18 Chapter 3: BIOS setup
Chapter 3
GPU Power Saving Mode [Disabled]
This item appears only when you set the GPU Booster item to [Enabled].
[Enabled]
Select [Enabled] to reduce the iGPU power consumption when the system
is idle.
[Disabled] Disables this function.
3.5.8 OC Tuner Utility
OC Tuner utility automatically overclocks the frequency and voltage of the CPU and DRAM.
Press to start auto tuning. It takes around five minutes, and the system will reboot for
several times until auto tuning is completed.
3.5.9 DRAM Timing Configuration
The configuration options for some of the following items vary depending on the DIMMs
you install on the motherboard.
DRAM CAS# Latency [Auto]
Configuration options: [Auto] [4 CLK] – [12 CLK]
DRAM RAS# to CAS# Delay [Auto]
Configuration options: [Auto] [5 CLK] – [12 CLK]
DRAM RAS# PRE Time [Auto]
Configuration options: [Auto] [5 CLK] – [12 CLK]
DRAM RAS# ACT Time [Auto]
Configuration options: [Auto] [15 CLK] – [30 CLK]
DRAM READ to PRE Time [Auto]
Configuration options: [Auto] [4 CLK] [5 CLK] [6 CLK] [7 CLK]
DRAM Row Cycle Time [Auto]
Configuration options: [Auto] [12 CLK] – [42 CLK]
DRAM WRITE Recovery Time [Auto]
Configuration options: [Auto] [5 CLK] [6 CLK] [7 CLK] [8 CLK] [10 CLK] [12 CLK]
DRAM RAS# to RAS# Delay [Auto]
Configuration options: [Auto] [4 CLK] [5 CLK] [6 CLK] [7 CLK]
DRAM READ to WRITE Delay [Auto]
Configuration options: [Auto] [3 CLK] – [17 CLK]
DRAM WRITE to READ Delay(DD) [Auto]
Configuration options: [Auto] [2 CLK] – [10 CLK]