Asus M3N-HT Deluxe/Mempipe User Manual
Page 64
2-38
Chapter 2: Hardware information
4. USB connectors (10-1 pin USB34; 10-1 pin USB78; 10-1 pin USB910)
These connectors are for USB 2.0 ports. Connect the USB module cable
to any of these connectors, then install the module to a slot opening at the
back of the system chassis. These USB connectors comply with USB 2.0
specification that supports up to 4�0 Mbps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
5. IEEE 1394a port connector (10-1 pin IE1394_1; 10-1 pin IE1394_2)
These connectors are for IEEE 1394a ports. Connect the IEEE 1394a
module cable to one of the connectors, then install the module to a slot
opening at the back of the system chassis.
You can connect the front panel USB cable to the ASUS Q-Connector (USB,
blue) first, and then install the Q�Connector (USB) to the USB connector
onboard if your chassis supports front panel USB ports.
Never connect a USB cable to the IEEE 1394a connector. Doing so will damage
the motherboard!
You can connect the front panel 1394 cable to the ASUS Q-Connector (1394,
red) first, and then install the Q�Connector (1394) to the 1394 connector
onboard if your chassis supports front panel 1394 ports.