Asus M3N-HT Deluxe/Mempipe User Manual
Page 102
4-24
Chapter 4: BIOS setup
MEMCLK Drive Strength [Auto]
Configuration options: [Auto] [0.75x] [1.00x] [1.25x] [1.50x]
Data Drive Strength [Auto]
Configuration options: [Auto] [0.75x] [1.00x] [1.25x] [1.50x]
DQS Drive Strength [Auto]
Configuration options: [Auto] [0.75x] [1.00x] [1.25x] [1.50x]
DRAM Drivers Weak Mode [Auto]
Configuration options: [Auto] [Normal] [Weak]
AMD Virtualization [Enabled]
Enabling this functions allows hardware facilitated capacities for running several
386 virtual machines on the system simultaneously.
Configuration options: [Disabled] [�nabled]
SLI-Ready Memory [Disabled]
Allows you to select the SPD profile for SLI�Ready memory modules. The
configuration options may vary depending on the type of module you installed.
Configuration options: [Disabled] [Optimal] [High Frequency]
SLI-Ready Memory CPUOC [n]
Allows you to set the CPU overclocking percentage to optimize memory settings.
Setting to [CPUOC MAX] will make memory settings to reach the optimum. During
CPU overclocking, you may need to manually adjust the CPU voltage for better
system stability. This item is not user�configurable when the SLI-Ready Memory
item is disabled.
Configuration options: [CPUOC 0%] [CPUOC 1%] [CPUOC 2%]...
[CPUOC 14%][CPUOC MAX]
AMD Live! [Disabled]
Enables or disables the AMD Live! technology.
Configuration options: [Disabled] [�nabled]
AMD Cool “n” Quiet Function [Disabled]
Enables the AMD Cool “n” Quiet technology which supports P-state transitions in
AMD processors. Configuration options: [Disabled] [�nabled]
Cache Mapping Cycle [Auto]
Configuration options: [Auto] [Disabled] [�nabled]