Asus M3N-HT Deluxe/Mempipe - Manual (Page 103)

ASUS M3N-HT Deluxe Series 4-25
4.4.4 Chipset
Phoenix-AwardBIOS CMOS Setup Utility
Advanced
Chipset
Hybrid Support [Disabled]
iGPU Frame Buffer Control [Auto]
x Frame Buffer Size 128M
Onboard GPU [Auto]
K8<->NB HT Speed [Auto]
K8<->NB HT Width [Auto]
CPU Spread Spectrum [Disabled]
PCIE Spread Spectrum [Disabled]
SATA Spread Spectrum [Down Spread]
Primary Display Adapter [PCI-E]
Select Menu
Item Specific Help
Hybrid Support [Disabled]
Allows you to enable or disable the NVIDIA Hybrid SLI technology.
Configuration options: [Disabled] [Auto]
iGPU Frame Buffer Control [Auto]
Configuration options: [Auto] [Manual]
Frame Buffer Size [256M]
This item becomes user�configurable when you set the iGPU Frame Buffer
Control item to [Manual] and allows you to set the frame buffer size for the
onboard GPU.
Configuration options: [64M] [12�M] [256M] [512M]
• The default setting of the Frame Buffer Size item varies depending on the
total memory size you install on the motherboard.
System memory size 256MB 512MB 1G 2G and above
Frame buffer size (default value) 64MB 64MB 128MB 256MB
• To support the Hybrid SLI feature, set the frame buffer size to 256MB or
higher.
Onboard GPU [Enabled]
Setting this item to [Auto] will disable the onboard GPU and frame buffer if system
detects any discrete graphics card.
Configuration options: [Auto] [Always �nable]
K8<->NB HT Speed [Auto]
Configuration options: [Auto] [200 MHz] [400 MHz] [600 MHz] [�00 MHz]
[1 GHz]
If you are using an AM2+ CPU, the configuration options will be as follows:
[Auto] [200 MHz] [400 MHz] [600 MHz] [�00 MHz] [1 GHz] [1.2 GHz]...[2.6 GHz]