beautypg.com

1 boot device priority, 2 boot settings configuration, 3 security – Asus M4A78LT PLUS User Manual

Page 51: Boot device priority -19, Boot settings configuration -19, Security -19

background image

ASUS M4A78LT PLUS

2-19

2.6.1

Boot Device Priority

1st ~ xxth Boot Device [xxx Drive]

These items specify the boot device priority sequence from the available devices. The

number of device items that appears on the screen depends on the number of devices

installed in the system. Configuration options: [Removable Dev.] [Hard Drive]

[ATAPI CD-ROM] [Disabled]

• To select the boot device during system startup, press when ASUS Logo appears.
• To access Windows

®

OS in Safe Mode, do any of the following:

Press when ASUS Logo appears.

Press after POST.

2.6.2

Boot Settings Configuration

Quick Boot [Enabled]

Enabling this item allows the BIOS to skip some power on self tests (POST) while booting

to decrease the time needed to boot the system. When this item is set to [Disabled], BIOS

performs all the POST items. Configuration options: [Disabled] [Enabled]

Full Screen Logo [Enabled]

Enables or disables the full screen logo display feature. Configuration options: [Disabled]

[Enabled]

Set this item to [Enabled] to use the ASUS MyLogo2™ feature.

AddOn ROM Display Mode [Force BIOS]

Sets the display mode for option ROM. Configuration options: [Force BIOS] [Keep Current]

Bootup Num-Lock [On]

Selects the power-on state for the NumLock. Configuration options: [Off] [On]

Wait for ‘F1’ If Error [Enabled]

When this item is set to [Enabled], the system waits for the F1 key to be pressed when error

occurs. Configuration options: [Disabled] [Enabled]

Hit ‘DEL’ Message Display [Enabled]

When this item is set to [Enabled], the system displays the message Press DEL to run

Setup during POST. Configuration options: [Disabled] [Enabled]

2.6.3

Security

The Security menu items allow you to change the system security settings. Select an item

then press to display the configuration options.

Change Supervisor Password

Select this item to set or change the supervisor password. The Supervisor Password item

on top of the screen shows the default Not Installed. After you set a password, this item

shows Installed.