Asus WL-330N - Manual (Page 63)

5-3 ASUS WL-330N
5.3 Replacing the cable connections of other
devices
You can also use the WL-330N to replace your Xbox, PlayStation ® 2, orset-top box
network cable connection.
To do this:
1. Switch the WL-330N to Ethernet adapter mode using the mode switch. (Default
SSID: ASUS)
2. Place the WL-330N nearest the AP you wish to connect, then turn on the
device.
3. Connect one end of the supplied RJ-45 cable to the Ethernet port of the device
and the other end to the Xbox, PlayStation ® 2, or set-top box Ethernet port.
4. Set the IP address of the Xbox, PlayStation ® 2, or set-top box toestablish
connection to the local network. Verify your connection.
5.4 Sharing Internet connection with other
computers
Refer to the typical network configuration below and the table on the next page for
information on Internet connection sharing with other computers in your office or
home network.
Set the WL-330N to Router mode before sharing an Internet connection with other computers in
your network.
Wireless computer
Internet
˝
ADSL/Cable modem
WL-330N