Asus Blitz Formula (Special Edition) - Manual (Page 43)

ASUS Blitz Formula 2-17
1. Assemble the optional fan kit by
fitting the grooved edge of the
optional fan to the plastic fan seat
and snapping it into place.
2. The photo below demostrates the
the optional fan ready for use.
3. Slide the optional fan onto the
heatsink, then connect the fan
cable.
4. The photo shows the fans installed
on the motherboard.
When you are using water-cooling modules, make sure to install TWO optional
fans to obtain more effective heat dissipation.
Optional fan on the other side fins
• Plug the optional fan cables to any of the CHA_FAN1, CHA_FAN4, and
PWR_FAN connectors on the motherboard.
• Make sure the optional fan is installed correctly to prevent damage to the
fan and motherboard components.