Asus P5L-MX/IPAT - Manual (Page 57)

ASUS P5L-MX/IPAT 2-13
IDE Configuration
PATA Master Not Present
PATA Slave Not Present
SATA Port1 Not Present
SATA Port2 Not Present
SATA Port3 Not Present
SATA Port4 Not Present
IDE Controller [Enabled]
IDE mode [PATA-Primary,SATA-...]
Serial-ATA Port1 [Enabled]
Serial-ATA Port2 [Enabled]
Serial-ATA Port3 [Enabled]
Serial-ATA Port4 [Enabled]
Enable/Disable IDE
Controller
2.4.9 IDE Configuration
The items in this menu allow you to set or change the configurations for
the IDE devices installed in the system. Select an item then press
if you wish to configure the item.
IDE Controller [Enabled]
Allows you to enable or disable the onboard IDE controller.
Configuration options: [Enabled] [Disabled]
IDE Mode [PATA-Primary, SATA-...]
Allows you to select the IDE mode.Configuration options: [SATA only-
Primary/Secondary (Non-combined, Legacy)] [SATA-Primary, PATA-
Secondary (combined, Legacy)] [PATA-Primary, SATA-Secondary
(Combined, Legacy)] [PATA only-Primary (Non-combined, Legacy)] [PATA-
Primary, SATA-Ports 1,2,3,4 (Non-combined, PATA-Legacy)]
Serial-ATA Port1/2/3/4 [Enabled]
Allows you to disable or enable the Serial-ATA devices.
Configuration options: [Disabled] [Enabled]