Asus P5B - Manual (Page 87)

ASUS P5B 4-23
Front Panel Support Type [AC97]
Allows you to set the front panel audio connector (AAFP) mode to legacy
AC’97 or high‑definition audio depending on the audio standard that the front
panel audio module supports. Configuration options: [AC97][HD Audio]
Onboard PCIE Gb LAN [Enabled]
Allows you to enable or disable the onboard PCIE Gigabit LAN controller.
Configuration options: [Disabled] [Enabled]
LAN Option ROM [Disabled]
Allows you to enable or disable the boot ROM in the onboard LAN controller.
This item appears only when the Onboard LAN item is set to Enabled.
Configuration options: [Disabled] [Enabled]
JMicron SATA/PATA Controller [Enabled]
Allows you to enable or disable the JMicron SATA/PATA controller.
Configuration options: [Disabled] [Enabled]
JMicron SATA Controller Mode [AHCI]
Allows you to set the JMicron SATA controller mode.This item appears only
when the JMicron SATA/PATA Controller item is set to Enabled.
Configuration options: [IDE] [AHCI] [RAID]
The JMicron PATA controller keeps IDE mode.
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address. Configuration options:
[Disabled] [3F8/IRQ4][2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Parallel Port Address [378]
Allows you to select the Parallel Port base addresses.
Configuration options: [Disabled] [378] [278] [3BC]
Parallel Port Mode [ECP]
Allows you to select the Parallel Port mode.
Configuration options: [Normal] [Bi‑directional] [EPP] [ECP]
ECP Mode DMA Channel [DMA3]
Appears only when the Parallel Port Mode is set to [ECP]. This item
allows you to set the Parallel Port ECP DMA.
Configuration options: [DMA0] [DMA1] [DMA3]
Parallel Port IRQ [IRQ7]
Configuration options: [IRQ5] [IRQ7]