Asus SP97 - Manual (Page 21)

ASUS SP97 / SP97-V User’s Manual 21
III. INSTALLATION
(System Memory)
III. INST
ALLA
TION
SIMM Installation
1. The SIMM memory modules will fit in only one orientation as shown because
the plastic safety tab on one end of the SIMM sockets requires the notched end
of the SIMM memory modules.
72-Pin SIMM Sockets
1 2 3 4
Notched End
R
2. Press the memory module firmly into place starting from a 45-degree angle,
making sure that all the contacts are aligned with the socket.
3. With your fingertips, rock the memory module into a vertical position so that it
clicks into place. The plastic guides should go through the two mounting holes
and the clips should snap.
72 Pin DRAM in SIMM Socket Support Clip
Safety Tab (This Side Only) Mounting Hole
To release the memory module, push both clips outward and rock the module
out of the clips