Asus P5B Deluxe/WiFi-AP - Manual (Page 62)

2-36 Chapter 2: Hardware information
Q-Connector (system panel)
You can use the ASUS Q-Connector to connect/disconnect chassis front
panel cables in a few steps. Refer to the instructions below to install the
ASUS Q-Connector.
2. Install the ASUS Q-Connector to the system
panel connector, making sure the orientation
matches the labels on the motherboard.
1. Connect the front panel cables to the ASUS Q-
Connector.
Refer to the labels on the Q-Connector to know
the detailed pin definitions, then match them to
the respective front panel cable labels.
3. The front panel functions are now enabled. The
figure shows the Q-Connector properly installed
on the motherboard.