Asus Terminator C3 - Manual (Page 27)

A S U S T e r m i n a t o r 1 C 3 b a r e b o n e s y s t e m A S U S T e r m i n a t o r 1 C 3 b a r e b o n e s y s t e m A S U S T e r m i n a t o r 1 C 3 b a r e b o n e s y s t e m A S U S T e r m i n a t o r 1 C 3 b a r e b o n e s y s t e m A S U S T e r m i n a t o r 1 C 3 b a r e b o n e s y s t e m 2 - 1 1 2 - 1 1 2 - 1 1 2 - 1 1 2 - 1 1
2.7 Installing an optical drive
An optical drive is an optional item in this barebone system. Refer to the
instructions in this section if you acquired a model without an optical drive.
Follow these steps to install a
CD-ROM drive.
1. Place the chassis upright.
2. Insert the optical drive into the
upper 5.25-inch drive bay.
C D - R O M s c r e w s C D - R O M s c r e w s C D - R O M s c r e w s C D - R O M s c r e w s C D - R O M s c r e w s
5.25-inch drive bay
3. Carefully push the CD-ROM
drive into the bay until its
screw holes align with the
holes on the bay as shown.
4. Secure the CD-ROM with two
screws as shown.
5. Repeat steps 3 and 4 to install
a second optical drive into the
lower 5.25-inch drive bay.