Asus P7H55-M/BR - Manual (Page 38)

ASUS P7H55-M 1-26
8. Serial ATA connectors (7-pin SATA1-6)
These connectors are for the Serial ATA signal cables for Serial ATA 3Gb/s hard disk
and optical disk drives. The Serial ATA 3Gb/s is backward compatible with Serial ATA
1.5Gb/s specification. The data transfer rate of the Serial ATA 3Gb/s is faster than the
standard parallel ATA with 133 MB/s (Ultra DMA133).
Install the Windows ® XP Service Pack 2 or later version before using Serial ATA.
9. USB connectors (10-1 pin USB78, USB910, USB1112)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480 Mbps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!
The USB module cable is purchased separately.
SATA1
GND
RSATA_TXP1 RSATA_TXN
1
GND
RSATA_RXP1 RSATA_RXN
1
GND
SATA2
GND
RSATA_TXP2 RSATA_TXN
2
GND
RSATA_RXP2 RSATA_RXN
2
GND
SATA3
GND RSATA_RXN
3
RSATA_RXP3 GND RSATA_TXN
3
RSATA_TXP3 GND
SATA4
GND RSATA_RXN
4
RSATA_RXP4 GND RSATA_TXN
4
RSATA_TXP4 GND
SATA5
GND RSATA_RXN
5
RSATA_RXP5 GND RSATA_TXN
5
RSATA_TXP5 GND
SATA6
GND RSATA_RXN
6
RSATA_RXP6 GND RSATA_TXN
6
RSATA_TXP6 GND
P7H55-M SATA connectors
P7H55-M USB2.0 connectors
USB+5V USB_P12- USB_P12+ GND NC
USB+5V
USB_P11- USB_P11+
GND
USB1112
PIN 1
USB+5V USB_P10- USB_P10+ GND NC
USB+5V USB_P9- USB_P9+
GND
USB910
PIN 1
USB+5V USB_P8- USB_P8+ GND NC
USB+5V USB_P7- USB_P7+
GND
USB78
PIN 1