Asus P8H77-M PRO - Manual (Page 85)

ASUS P8H77-M PRO 3-19
Chapter 3
S.M.A.R.T. Status Check [Enabled]
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When
read/write of your hard disk errors occur, this feature allows the hard disk to report warning
messages during the POST. Configuration options: [Enabled] [Disabled]
Hot Plug [Disabled]
These items appear only when you set the SATA mode item to [AHCI Mode] or [RAID Mode],
and allow you to enable/disable SATA Hot Plug Support.
Configuration options: [Disabled] [Enabled]
3.5.4 System Agent Configuration
Memory Remap Feature [Enabled]
[Enabled] Allow you to enable remapping the memory above 4GB.
[Disabled] Disables this function.
Graphics Configuration
Primary Display [Auto]
Allows you to decide which graphics controller to use as the primary boot device.
Configuration options: [Auto] [iGFX] [PEG]
iGPU Memory [64M]
Allows you to set the iGPU memory size. Configuration options: [32M] [64M] [96M]
[128M] ~ [448M] [480M] [512M]
Render Standby [Enabled]
Allows you to enable or disable Render Standby by internal graphics devices.
Configuration options: [Enabled] [Disabled]
iGPU Multi-Monitor [Enabled]
Allows you to enable or disable Internal Graphics Device Multi-Monitor Support for add-
on VGA devices. The iGPU shared memory size will be fixed at 64MB. Configuration
options: [Disabled] [Enabled]
Main Ai Tweaker Advanced Monitor Boot Tool
Enable or disable memory remap above
4G.
Back Advanced\ System Agent Configuration >
UEFI BIOS Utility - Advanced Mode
System Agent Configuration
Memory Remap Feature Enabled
> Graphics Configuration
> NB PCIe Configuration