5 pci subsystem settings, Pci subsystem settings -21, Pci latency timer [32 pci bus clocks – Asus Z9PA-U8 User Manual
Page 83: Vga palette snoop [disabled, Perr# generation [disabled, Serr# generation [disabled, Load rt32 image [enabled
ASUS Z9PA-U8
4-21
4.4.5
PCI Subsystem Settings
In case of multiple Option
ROMs (Legacay and EFI
Compatible), specifies what
PCI option ROM to lanuch.
PCI Bus Driver Version
V 2.05.02
PCI Common Settings
PCI Latency Timer
[32 PCI Bus Clocks]
VGA Palette Snoop
[Disabled]
PERR# Generation
[Disabled]
SERR# Generation
[Disabled]
Load RT32 Image
[Enabled]
PCI Express Settings
PCIE Slot Option Rom Configuration
→←:
Select Screen
↑↓:
Select Item
Enter: Select Item
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save & Exit
ESC: Exit
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
PCI Latency Timer [32 PCI Bus Clocks]
Value to be programmed into PCI latency timer register.
Configuration options: [32 PCI Bus Clocks] [64 PCI Bus Clocks] [96 PCI Bus
Clocks] [128 PCI Bus Clocks] [160 PCI Bus Clocks] [192 PCI Bus Clocks] [224 PCI
Bus Clocks] [248 PCI Bus Clocks]
VGA Palette Snoop [Disabled]
Enables or disables VGA pallette registers snooping.
Configuration options: [Disabled] [Enabled]
PERR# Generation [Disabled]
Enables or disables PCI device to generate PERR#.
Configuration options: [Disabled] [Enabled]
SERR# Generation [Disabled]
Enables or disables PCI device to generate SERR#.
Configuration options: [Disabled] [Enabled]
Load RT32 Image [Enabled]
Enables or disables PCI device to load RT32 image.
Configuration options: [Disabled] [Enabled]