Asus Z9PA-U8 - Manual (Page 66)

4-4 Chapter 4: BIOS setup
4.1.2 ASUS EZ Flash 2
The ASUS EZ Flash 2 allows you to update the BIOS without using a DOS-based
utility.
Before you start using this utility, download the latest BIOS from the ASUS
website at www.asus.com.
To update the BIOS using EZ Flash 2
1. Insert the USB flash disk that contains the latest BIOS file to the USB port.
2. Enter the BIOS setup program. Go to the Tool menu to select ASUS EZ
Flash 2 Utility and press to enable it.
Flash Info
MODEL: Z9PA-U8 VER: 3005 DATE: 07/25/2012
Exit
[Enter] Select or Load [Tab] Switch [Up/Down/PageUp/PageDown/Home/End] Move [Esc] Exit [F2] Backup
fs0:\
Drive Folder Info
fs0:\ 12/09/10 10:23p 4194304 Z9PA-U8.ROM
fs1:\
ASUSTek EZ Flash 2 Utility V01.04
File Infor
MODEL: VER: DATE:
Help Info
3. Press to switch to the Drive field.
4. Press the Up/Down arrow keys to find the USB flash disk that contains the
latest BIOS, and then press .
5. Press to switch to the Folder Info field.
6. Press the Up/Down arrow keys to find the BIOS file, and then press
to perform the BIOS update process. Reboot the system when the update
process is done.