beautypg.com

4 pch sata configuration, Pch sata configuration -20, Sata mode [ahci mode – Asus Z9PA-U8 User Manual

Page 82: S.m.a.r.t. status check [enabled, Aggressive link power management [enabled, Configuration options: [enabled] [disabled

background image

4-20

Chapter 4: BIOS setup

4.4.4

PCH SATA Configuration

(1)IDE Mode. (2)AHCI Mode.

(3)RAID Mode.

→←:

Select Screen

↑↓:

Select Item

Enter: Select Item

+/-: Change Opt.

F1: General Help

F2: Previous Values

F5: Optimized Defaults

F10: Save & Exit

ESC: Exit

SATA Mode [AHCI Mode]

Allows you to set the SATA configuration.

Configuration options: [Disabled] [IDE Mode] [AHCI Mode] [RAID Mode]

• If you want to use the Serial ATA hard disk drives as Parallel ATA physical

storage devices, set this item to [IDE Mode].

• If you want the Serial ATA hard disk drives to use the Advanced Host

Controller Interface (AHCI), keep the default setting [AHCI Mode]. The AHCI

allows the onboard storage driver to enable advanced Serial ATA features

that increases storage performance on random workloads by allowing the

drive to internally optimize the order of commands.

• If you want to create RAID sets with LSI MegaRAID utility, or Intel

®

Rapid

Storage Technology Enterprise from the Serial ATA hard disk drives, set this

item to [RAID Mode].

S.M.A.R.T. Status Check [Enabled]

S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor

system. When hard disk read/write errors occur, this feature allows the hard disk to

report warning messages during the POST.

Configuration options: [Enabled] [Disabled]

Aggressive Link Power Management [Enabled]

Configuration options: [Enabled] [Disabled]

Port 1/2/3/4/5/6 Staggered Spin-up [Disabled]

AHCI supports staggered spin-up.

Configuration options: [Enabled] [Disabled]

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.

Advanced

Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.

SATA Port1

Not Present

SATA Port2

Not Present

SATA Port3

Not Present

SATA Port4

Not Present

SATA Port5

Not Present

SATA Port6

Not Present

SATA Mode

[AHCI Mode]

S.M.A.R.T. Status Check [Enabled]

Aggressive Link Power Management [Enabled]

Port1 Staggered Spin-up

[Disabled]

Port2 Staggered Spin-up

[Disabled]

Port3 Staggered Spin-up

[Disabled]

Port4 Staggered Spin-up

[Disabled]

Port5 Staggered Spin-up

[Disabled]

Port6 Staggered Spin-up

[Disabled]