Asus Z9PA-U8 - Manual (Page 146)

5-38 Chapter 5: RAID configuration
5.4.2 Changing a Volume Type
To change the volume type in Volume Properties:
1. Click the SATA array items you want to change in Volumes field.
2
From the Volume Properties field, select Type:RAID 1 Change type.
We recommend a lower stripe size for server systems, and a higher stripe size
for multimedia computer systems used mainly for audio and video editing.
3. You can change the Name, Select the new volume type, and Select
additional disks to include in the new volume if needed.
4. Select the Data stripe size for the RAID array (for RAID 0, 10 and 5 only),
and click OK. The available stripe size values range from 4 KB to 128 KB.
The following are typical values:
RAID 0: 128KB
RAID 10: 64KB
RAID 5: 64KB