Asus Z9PA-U8 - Manual (Page 120)

5-12 Chapter 5: RAID configuration
5.2.2 Adding or viewing a RAID configuration
You can add a new RAID configuration or view an existing configuration using the
View/Add Configuration command.
Adding a new RAID configuration
To add a new RAID configuration:
1. From the Management Menu, select Configure > View/Add Configuration,
and then press .
2. The ARRAY SELECTION MENU displays the available drives connected
to the SATA ports. Select the drives that you want to include in the RAID
set, then press . When selected, the drive indicator changes from
READY to ONLIN A[X]-[Y], where X is the array number, and Y is the drive
number.
The information of the selected hard disk drive displays at the bottom of the
screen.
3. Follow steps 3 to 12 of section 5.2.1 Creating a RAID set: Using Easy
Configuration to add a new RAID set.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
View/Add to The Existing Configuration
Configuration Menu
Easy Configuration
New Configuration
View/Add Configuration
Clear Configuration
Select Boot Drive
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
BIOS Version A.10.09231523R
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Port # 2 DISK 77247MB HDS728080PLA380 PF20A60A
View/Add Configuration - ARRAY SELECTION MENU
PORT #
ONLIN A00-00
ONLIN A00-01
READY
READY 0
1
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
BIOS Version A.10.09231523R
SPACE-Sel,ENTER-EndArray,F10-Configure,F2-Drive Info,F3-Virtual Drives,F4-HSP
2
3