Asus Z9PA-U8 User Manual
Page 106
4-44
Chapter 4: BIOS setup
To clear the administrator password, follow the same steps as in changing an
administrator password, but press
password.
User Password
If you have set a user password, you must enter the user password for accessing
the system.
To set a user password:
1. Select the User Password item and press
2. From the Create New Password box, key in a password, then press
3. Confirm the password when prompted.
To change a user password:
1. Select the User Password item and press
2. From the Enter Current Password box, key in the current password, then
press
3. From the Create New Password box, key in a new password, then press
4. Confirm the password when prompted.
To clear the user password, follow the same steps as in changing a user password,
but press
UEFI Secure Boot Management
Secure Boot control [Disabled]
Enables or disables the secure boot flow control.
Configuration options: [Enabled] [Disabled]
The following items appear only when the Secure Boot control is set to Enabled.
Secure Boot Policy
This sub-section contains parameters that allow you to configure the Secure Boot Policy
extended options.
Key Management
This sub-section contains parameters that allow you to configure the Key Management
settings.