beautypg.com

3 onboard devices configuration, Onboard devices configuration -21, Chapter 3 – Asus P5Q TURBO User Manual

Page 79: High definition audio [enabled, J-micron esata/pata controller [enabled, Atheros gigabit lan [enabled, Onboard 1394 controller [enabled, Serial port1 address [3f8/irq4

background image

ASUS P5Q Turbo

3-21

Chapter 3

3.6.3

Onboard Devices Configuration

Onboard Devices Configuration

High Definition Audio

[Enabled]

Front Panel Type

[HD Audio]

J-Micron eSATA/PATA Controller

[Enabled]

Controller Mode

[IDE]

Atheros GigaBit LAN

[Enabled]

LAN Boot ROM

[Disabled]

Onboard 1394 Controller

[Enabled]

Serial Port1 Address

[3F8/IRQ4]

Enable or Disable

High Definition Audio

Controller

BIOS SETUP UTILITY

Advanced

High Definition Audio [Enabled]

[Enabled]

Enables the High Definition Audio Controller.

[Disabled]

Disables the controller.

The following item appears only when you set the High Definition Audio item to [Enabled].

Front Panel Type [HD Audio]

Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or

high-definition audio depending on the audio standard that the front panel audio

module supports.

[AC97]

Sets the front panel audio connector (AAFP) mode to legacy AC’97

[HD Audio] Sets the front panel audio connector (AAFP) mode to high definition audio.

J-Micron eSATA/PATA Controller [Enabled]

[Enabled]

Enables the onboard J-Micron eSATA/PATA controller.

[Disabled]

Disables the controller.

Controller Mode [IDE]

This item appears only when you set the previous item to [Enabled], and allows you to

select the J-Micron controller mode. Configuration options: [RAID] [IDE] [AHCI]

Atheros GigaBit LAN [Enabled]

[Enabled]

Enables the Atheros Gigabit LAN controller.

[Disabled]

Disables the controller.

LAN Boot ROM [Disabled]
This item appears only when you set the previous item to [Enabled].
[Enabled] Enables the Atheros Gigabit LAN Boot ROM.
[Disabled] Disables the LAN Boot ROM.

Onboard 1394 Controller [Enabled]

[Enabled]

Enables the onboard IEEE 1394a controller.

[Disabled]

Disables the controller.

Serial Port1 Address [3F8/IRQ4]

Allows you to select the Serial Port1 base address.

Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]