Asus CUV266 - Manual (Page 66)

ASUS CUV266 User’s Manual 66
4. BIOS SETUP
4. BIOS SETUP
Chip Configuration
AGP Fast Write [Disabled]
Configuration options: [Disabled] [Enabled]
AGP Drive Strength [Auto]
Configuration options: [Auto] [Manual]
Graphics Aperture Size [64MB]
This feature allows you to select the size of mapped memory for AGP graphic
data. Configuration options: [4MB] [8MB] [16MB] [32MB] [64MB]
[128MB] [256MB]
Video Memory Cache Mode [UC]
USWC (uncacheable, speculative write combining) is a new cache
technology for the video memory of the processor. It can greatly improve
the display speed by caching the display data. You must set this to UC
(uncacheable) if your display card does not support this feature, otherwise
the system may not boot. Configuration options: [UC] [USWC]
Onboard PCI IDE Enable [Both]
This field allows tou to enable either the primary IDE channel or secondary
IDE channel, or both. You can also set both channels to [Disabled].
Configuration options: [Both] [Primary] [Secondary] [Disabled]
Onboard ACR LAN Enable [Auto Detect]
This field allows you to enable or disable the onboard Advanced
Communication Riser (ACR) and Local Area Network (LAN) controller
built-in the VT8233 chipset. Configuration options: [Enabled] [Auto Detect]
[Disabled]
Memory Hole At 15M-16M [Disabled]
This field allows you to reserve an address space for ISA expansion cards.
Setting the address space to a particular setting makes that memory space
unavailable to other system components. Expansion cards can only access
memory up to 16MB. Configuration options: [Disabled] [Enabled]