Asus M2A-VM HDMI - Manual (Page 80)

2-30 Chapter 2: BIOS setup
Date of Month Alarm [xx]
To set the date of alarm, highlight this item and press to display the
Date of Month Alarm pop-up menu. Key-in a value within the specified range
then press . Configuration options: [Min=0] [Max=31]
Alarm Time (hh:mm) [xx:xx:xx]
To set the time of alarm:
1. Highlight this item and press to display a pop-up menu
for the hour field.
2. Key-in a value (Min=0, Max=23), then press .
3. Press to move to the minutes field then press .
4. Key-in a minute value (Min=0, Max=59), then press .
5. Press to move to the seconds field then press .
6. Key-in a value (Min=0, Max=59), then press .
2.5.4. Hardware.Monitor
The items in this sub-menu displays the hardware monitor values automatically
detected by the BIOS. It also allows you to change CPU Q-Fan feature-related
parameters. Select an item then press to display the configuration options.
Select Menu
Item Specific Help
Press [Enter] to
enable or disable
Hardware Monitor
Q-Fan Controller [Enabled]
CPU Fan Type [DC]
Vcore Voltage [1.56V]
3.3V Voltage [3.18V]
5V Voltage [5.05V]
12V Voltage [11.58V]
CPU Temperature 48ºC
MB Temperature 41ºC
CPU FAN Speed 3068 RPM
CHA_FAN Speed 0 RPM
PWR_FAN Speed 0 RPM
CPU Fan Speed warning [800 RPM]
Phoenix-Award BIOS CMOS Setup Utility
Power
Q-Fan.Controller.[Disabled]
Allows you to enable or disable the Q-Fan controller.
Configuration options: [Disabled] [Enabled]
CPU.Fan.Type.[DC]
Allows you to select the CPU fan type.
Configuration options: [DC] [PWM]