Asus M2A-VM HDMI - Manual (Page 47)

ASUS M2A-VM HDMI 1-35
15. Ports on the HDMI module
This module contains four ports, allowing you to connect any kind of video/
audio source to your system. Connect the HDMI module to the onboard PCI
Express x16 slot and the HDMI module cable to the onboard
YUV/SPDIF_OUT connector.
a. HDMI.port. This port is for a high-definition multimedia interface (HDMI)
connector.
b. S-Video port / YPbPr port. This 7-pin port connects any kind of video source
via the bundled YPbPr cable or an S-Video cable.
c. Video.port. This port connects any kind of video source via an RCA cable.
d. S/PDIF Out port. This port connects an external audio output device via an
coaxial S/PDIF cable.
d
a
b
c
• The RCA cable and the S-Video cable are purchased separately.
• Simultaneous output for YPbPr, AV, S, and RGB is not supported.
Onboard.VGA.ports. HDMI module ports
DVI. RGB HDMI TV (S-Video/
Video/YPbPr)
• •
• •
• •
• •
•
•
Dual display table
This table indicates two corresponding displays when you connect two monitors on any two of
the following ports.
YPbPr.cable
• Refer to page 1-29 for the position of the onboard YUV/SPIDF_OUT
connector.
• After installing the HDMI module, make sure the audio device of Sound
playback is HDMI Audio rear output (the name may be different based
on.the.OS). Go to Start > Control Panel > Sounds and Audio Devices >
Sound Playback to configure the setting.