Asus M2A-VM HDMI - Manual (Page 43)

ASUS M2A-VM HDMI 1-31
10.. IEEE.1394a.connector.(10-1.pinIE1394_2.[red])
This connector is for an additional IEEE 1394a port. Connect the IEEE 1394a
module cable (orange) to this connector, then install the module to a slot
opening at the back of the system chassis.
Never connect a USB port module cable to the IEEE 1394a connector. Doing so
will damage the motherboard!
M2A-VM HDMI
®
M2A-VM HDMI IEEE 1394a connector
IE1394_2
PIN1
GN
D
+12V TPB1
-
GN
D
TP
A1-
+12V TPB1
+
GN
D
TP
A1
+
The IEEE1394a module is purchased separately.
9. Optical drive audio in connector (4-pin CD)
These connectors allow you to receive stereo audio input from sound sources
such as a CD-ROM, TV tuner, or MPEG card.
M2A-VM HDMI
®
M2A-VM HDMI Internal audio connector
CD
(black)
Right
Au
dio Channe
l
Left
Au
dio Channe
l
Ground Ground
To activate ASUS Music Alarm:
• Connect the analog audio cable from the optical drive to the 4-pin CD-IN
connector labeled CD on the motherboard.
• Connect speakers or a headphone to the Line-Out (lime-colored) port on
the front or rear panel for audio output. You may also connect speakers or a
headphone to the output jack on the optical drive.