Asus P5N32-E SLI Plus - Manual (Page 144)

5-28 Chapter 5: Software support
• For detailed descriptions on the NVIDIA ® RAID configuration, refer to the
“NVIDIA ® RAID User Guide” found in your motherboard Support DVD.
• When using Windows ® 2000 operating system, make sure to install the
Windows ® 2000 Service Pack 4 or later version.
Make sure to re-enter your NVRAID settings after the CMOS is cleared;
otherwise, the system will not recognize your RAID setup.
Entering the NVIDIA ® RAID utility
To enter the NVIDIA ® RAID utility:
1. Boot up your computer.
2. During POST, press to display the main menu of the utility.
The RAID BIOS setup screens shown in this section are for reference only, and
may not exactly match the items on your screen.
[F6] Back [F7] Finish [TAB] Navigate [↑↓] Select [ENTER] Popup
At the bottom of the screen are the navigation keys. These keys allow you to move
through and select menu options.
NVIDIA RAID Utility Oct 5 2004
- Define a New Array -
RAID Mode: Striping Striping Block: Optimal
Free Disks Array Disks
Loc Disk Model Name Loc Disk Model Name
1.0.M XXXXXXXXXXXXXXXXXX
1.1.M XXXXXXXXXXXXXXXXXX [→] Add
2.0.M XXXXXXXXXXXXXXXXXX
2.1.M XXXXXXXXXXXXXXXXXX
[←] Del