Asus P6T6 WS Revolution - Manual (Page 168)

4-60 Chapter 4: Software support
Controller Configuration
From the utility menu bar, select Controller, and then press . The
Controller Config screen appears and allows you to change controller settings.
Marvell BIOS Setup (c) 2007 Marvell Technology Group Ltd.
ENTER/SPACE:Select, ESC:Back/Exit
[Selection] [Controller] [ Devices ] [ RAID ]
[Controller Config]
INT 13h [Enable]
Silent Mode [Disable]
Halt On Error [Disable]
INT 13h [Enable]
Allows you to enable or disable the Interrupt 13h support. Set this item to [Enable]
if you want to use the device(s) connected to Marvell ® SAS controller as boot
device. Set this item to [Disable] if you want to use the device(s) connected to
Marvell ® 88SE6320 SAS controller as data device.
Configuration options: [Disable] [Enable]
Silent Mode [Disable]
Allows you to enable or disable the BIOS POST silent mode. When enabled, the
information of the drives connected to Marvell ® SAS controller will be hidden during
system POST. Configuration options: [Disable] [Enable]
Halt On Error [Disable]
Allows you to enable or disable the Halt On Error function. When enabled, the
BIOS POST will halt when an error (such as virtual drive status changes) occurs
and require user’s confirmation to continue.
Configuration options: [Disable] [Enable]