Asus M4A88TD-M/USB3 - Manual (Page 79)

ASUS M4A88TD-M/USB3 3-23
Chapter 3
NorthBridge Chipset Configuration
3.6.2 Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an item then
press to display the submenu.
DRAM Controller Configuration
Bank Interleaving [Auto]
Allows you to enable the bank memory interleaving. Configuration options: [Auto] [Disabled]
Channel Interleaving [Auto]
Configuration options: [Auto] [Address bits 6] [Address bits 12]
[XOR of Address bits [20:16, 6]] [XOR of Address bits [20:16, 9]
Enable Clock to All DIMMs [Disabled]
Enables unused Clocks to DIMMs even though memory slots are not populated.
Configuraiton options: [Enabled] [Disabled]
MemClk Tristate C3/ATLVID [Disabled]
Configuration options: [Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Configuration options: [Disabled] [Enabled]
DCT Unganged Mode [Auto]
Configuration options: [Auto] [Always]
M4A88TD-M/USB3 BIOS Setup
Advanced
Chipset Configuration
NorthBridge Configuration
Internal Graphics
Memory Options &
Information
Version 0205
M4A88TD-M/USB3 BIOS Setup
Advanced
NorthBridge Chipset Configuration
DRAM Controller Configuration
ECC Configuration
Version 0205
M4A88TD-M/USB3 BIOS Setup
Advanced
DRAM Controller Configuration
Bank Interleaving [Auto]
Channel Interleaving [Auto]
Enable Clock to All DIMMs [Disabled]
MemClk Tristate C3/ATLVID [Disabled]
Memory Hole Remapping [Enabled]
DCT Unganged Mode [Auto]
Power Down Enable [Disabled]
Enable Bank Memory
Interleaving
Version 0205