Asus WL-600g - Manual (Page 38)

WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual
36
2. Define a Filter Name for the filter rule. Specify protocol, source IP address, subnet
mask and port (range) and destination IP address, subnet mask and port (range).
3. Press Save/Apply to save and activate the settings.
Firewall- Incoming IP filter
By default, all incoming IP traffic is blocked. You can allow certain types of IP traffic by
setting up filter rules at WL-600g.
1. Click
Advanced Setup -> Security -> IP Filtering -> Incoming in the left side
menu to open the configuration page. Click Add to create a new rule.
2. Define a Filter Name for the filter rule. Specify protocol, source IP address, subnet
mask and port (range) and destination IP address, submask and port (range).
3. Select the WAN interface through which the packets enter the firewall.
4. Press
Save/Apply to save and activate the settings.