Asus P4V8X-MX - Manual (Page 30)

ASUS P4V8X-MX Motherboard 1-21
P 4 V 8 X - M X
R
ATXPWR
+3.3VDC
-12.0VDC
GND
PS_ON#
GND
GND
GND
-5.0VDC
+5.0VDC
+5.0VDC
PWR_OK
+12.0VDC
+3.3VDC
+3.3VDC
GND
+5.0VDC
GND
+5.0VDC
GND
+5VSB +12V DC GND
+12V DC GND
ATX12V
P4V8X-MX ATX Power Connectors
P 4 V 8 X - M X
BLINE_OUT_L
MIC2
Line out_R Line out_L
BLINE_OUT_R
NC
MICPWR
+5V
A
AGND R
FP_AUDIO
P4V8X-MX Front Panel Audio Connector
7. Front panel audio connectors (10-1 pin FP_AUDIO)
This connector is for the front panel audio cable. This connector supports the
front panel audio I/O ports.
8. ATX power connector (20-pin ATXPWR and 4-pin ATX 12V)
This connectors are for the 20-pin ATX power and 4-pin ATX 12V supply
plugs. The plug from the power supply is designed to fit this connector in only
one orientation. Find the proper orientation and push down firmly until the
connector completely fit.
If you will need to replace the power supply in the future, make sure that your
new ATX 12V power supply can provide 8 A on the +12 V lead and at least 1
A on the +5 V standby lead (+5VSB). The minimum recommended wattage is
230W, or 300W for a fully configured system. The system may become unstable
and may experience difficulty powering up if the power supply is inadequate.