Reset to defaults, Chapter -troubleshooting – Asus WL-320gP User Manual
Page 47
.
T
ro
ub
le
sh
oo
tin
g
ASUS 802.11g Access Point
7
Chapter -Troubleshooting
Problem
The ASUS 802.11g AP Device
Discovery still cannot find or connect
to the ASUS AP after verifying the
IP address and LAN cable, changes
cannot be made, or password is
lost.
Solution
In case the ASUS 802.11g AP is inaccessible, you can restore the ASUS
802.11g AP’s factory default settings. Use a pen or paper clip to push the
button for about five seconds or until the power LED starts blinking.
Reset to Defaults
Below is the factory default values of the ASUS 802.11g AP.
Name
Default Value
Wireless - Interface
SSID
default
Channel
6
Encryption (WEP)
None
Broadcast SSID
No
Wireless - Bridge
AP Mode
Access Point Only
Wireless - Access Control
MAC Access Mode
Disabled
IP Config - LAN
IP Address
192.168.1.1
Get IP Address Automatically
Yes
Subnet Mask
255.255.255.0
Gateway
(blank)
System Setup - Password
Operation Mode
Access Point
User Name
admin
Password
admin