Asus WL-320gP - Manual (Page 25)

3. Software
ASUS 802.11g Access Point 2
Chapter 3 - Software Configuration
Access Point
2) Client Mode (Station)
Wireless client (Station) mode allows WL-320gP works as a performance
wireless client card as long as the device supports wired connection (with
Ethernet port), like Game console, PC or NB. Before association, you need
to set up the wireless setting and encryption.
Specify the SSID and Encryption of target AP accordingly under Wireless -
Interface sub menu then click Finish button to Save and Restore setting. After
system restarting, connect the Ethernet cable to WL-320gP ETHERNET port
and other device, then WL-320gP will work as wireless client card.
3) Repeater Mode (URE)
Wireless Repeater Mode allows WL-320gP works as range extender. You
can configure the wireless settings under Wireless-Interface sub menu (same
as working in Client Mode) the same as root AP, and then the wireless
coverage can be boost.
Note: If “Connect to APs in Remote Bridge List” and “Allow Anony-
mous” are both set to “No”, it means that this AP will not connect
with other APs and therefore the AP mode setting will return to “AP
Only”.
Allow anonymous? (Yes/No)
Select Yes to allow users without accounts to connect.