2 uncore configuration, 3 onboard devices configuration, Uncore configuration -19 – Asus P7H55-V User Manual
Page 55: Onboard devices configuration -19

Chapter 2: BIOS information
2-19
2.5.2
Uncore Configuration
The North Bridge Configuration menu allows you to change the advanced chipset settings.
Memory Remap Feature [Enabled]
[Disabled]
Do not allow remapping of memory.
[Enabled]
Allows for the segment of system memory that was previously
overwritten by PCI devices to be remapped above the total physical
memory.
Initiate Graphic Adapter [PCIE/PCI]
Allows you to decide which graphics controller to use as the primary boot device.
Configuration options: [PCI/PCIE] [PCIE/PCI]
2.5.3
Onboard Devices Configuration
HDA Controller [Enabled]
Enables or disables the High Definition Audio Controller.
Configuration options: [Enabled] [Disabled]
Front Panel Type [HD Audio]
Sets the front panel audio connector (AAFP) mode.
Configuration options: [AC97] [HD Audio]
SPDIF OUT Mode Setting [SPDIF]
Sets the S/PDIF out port or HDMI port as the display output port.
Configuration options: [SPDIF] [HDMI]
Realtek LAN [Enabled]
Enables or disables the onboard LAN Controller. Configuration options: [Enabled] [Disabled]
LAN Boot ROM [Disabled]
This item appears only when you enable the previous item(s).
Disables or enables the onboard LAN Boot ROM.
Configuration options: [Enabled] [Disabled]
VT6415 IDE Controller [Enabled]
Enables or disables the onboard IDE Controller. Configuration options: [Enabled] [Disabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]