Asus M4A88T-I DELUXE - Manual (Page 30)

3-12 Chapter 3: Setting up
2. Switch to the Wiress
Networks tab and click Add.
3. In Network name (SSID), input
the SSID you set in the Wifi-AP
@n utility. Set the Network
Authertication to WPA2-PSK
and Data encryption to AES.
Input the Network key. Click
OK to close all windows.
• Windows XP does not support WPA2-PSK authentication with
AES encryption, but you could download the Windows XP Hot fix
KB893357 from Microsoft ® official website at http://www.microsoft.
com/en/us/default.aspx. After installing the patch, follow the next
steps to set up the wireless network connection.
• Windows ® Vista natively supports WPA2-PSK authentication with
AES encryption. No further setting is needed.
1. Launch Windows Zero
Configuration and click
Change advanced settings.
* 2 When WiFI-AP @n is set to WPA2-PSK authentication with AES
encryption, Follow the instructions below if you want to connect other
computers to WiFi-AP @n.