Asus M4A88T-I DELUXE - Manual (Page 20)

3-2 Chapter 3: Setting up
3.1 About the setup utilities
After you have installed the WiFi-AP @n drivers and utilities to your system, you
are now ready to setup WiFi-AP @n in your network.
Make sure that you have selected the most appropriate configuration
for your wireless network before you proceed. Refer to section 1.4 for
details.
The WiFi-AP @n provides two configuration approaches: the setup wizard and the
setup utility. The former scheme provides an easy approach to the most frequently
used functions while the latter allows configuring all the functions, including the
advanced settings.
For normal users, the setup wizard helps to configure the WiFi-AP @n as an
access point or wireless station.
For advanced users, the setup utility helps to:
• Configure the WiFi-AP @n as an access point, or wireless station.
• Enable or disable the WiFi-AP @n.
• Show statistics.
Make sure you have connected the supplied antenna to the antenna
connector on the motherboard, or the WiFi-AP @n may not be able to
detect other wireless devices in your environment.