Asus P5GC-VM Pro - Manual (Page 68)

2-22 Chapter 2: BIOS setup
CPU TM function: [Enabled]
When enabled and CPU support this function, this function will work.
Configuration options: [Disabled] [Enabled]
Execute Disable Bit [Disabled]
When disabled, forces the XD feature flag to always return to 0.
Configuration options: [Disabled] [Enabled]
PECI [Disabled]
Allows you to enable or disable the PECI interface.
Configuration options: [Disabled] [Enabled]
Core Multi-Processing [Enabled]
Allows you to enable or disable one exeucation core.
Configuration options: [Disabled] [Enabled]
2.4.4 Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an
item then press to display the sub-menu.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Advanced Chipset Settings
Configure DRAM Timing by SPD [Enabled]
Hyper Path 3 [Auto]
DRAM Throttling Threshold [Auto]
Boot Graphic Adapter Priority [PCI Express/Int-VG]
Internal Graphics Mode Select [Enabled, 8MB]
Graphics memory type [Auto]
Boot Display Device [Auto]
PEG Buffer Length [Auto]
Link Latency [Auto]
PEG Root Control [Auto]
Slot Power [Auto]
High Priority Port Select [Disabled]
Enable or Disable
Configure DRAM Timing
by SPD
The following item appears only when you installed an Intel ® Pentium ® 4 or later
CPU that supports the Enhanced Intel SpeedStep ® Technology (EIST).
Intel ® SpeedStep Technology [Enabled]
Allows you to use the Enhanced Intel ® SpeedStep ® Technology. When set to
[Enabled], you can adjust the system power settings in the operating system to
use the EIST feature. Set this item to [Disabled] if you do not want to use the EIST.
Configuration options: [Enabled] [Disabled]