Asus P5GC-VM Pro - Manual (Page 24)

1-12 Chapter 1: Product introduction
1.6.2 Installling the CPU heatsink and fan
The Intel ® Core™2 EE / Core™2 Duo / Pentium ® D / Pentium ® 4 and Celeron ®
D processors require a specially designed heatsink and fan assembly to ensure
optimum thermal condition and performance.
• Install the motherboard to the chassis before you install the CPU fan and
heatsink assembly
• When you buy a boxed Intel ® Core™2 EE / Core™2 Duo / Pentium ® D /
Pentium ® 4 or Celeron ® D LGA775 processor, the package includes the
CPU fan and heatsink assembly. If you buy a CPU separately, make sure
that you use only Intel ® -certified multi-directional heatsink and fan.
• Your Intel ® Core™2 EE / Core™2 Duo / Pentium ® D / Pentium ® 4 or
Celeron ® D LGA775 heatsink and fan assembly comes in a push-pin design
and requires no tool to install.
If you purchased a separate CPU heatsink and fan assembly, make sure that
a Thermal Interface Material is properly applied to the CPU heatsink or CPU
before you install the heatsink and fan assembly.
To install the CPU heatsink and fan:
1. Place the heatsink on top of the
installed CPU, making sure that the
four fasteners match the holes on
the motherboard.
Fastener
Motherboard hole
Make sure each fastener is oriented as shown, with the narrow groove directed
outward.