Q-Tech QT41HC - Manual (Page 8)

MIL-PRF-55310/26D
8
Frequency-environmental tolerance:
3 ppm.
Frequency aging: Frequency aging shall be in accordance with
MIL-PRF-55310 and shall meet the limits of table II.
Vibration, sinusoidal:
Method 204 of MIL-STD-202 .
Nonoperating: Test condition D.
Operating: Not required.
Shock (nonoperating):
Method 213 of MIL-STD-202 , test condition I.
Thermal shock (nonoperating):
Method 107 of MIL-STD-202 , test condition B.
Ambient pressure:
Nonoperating: In accordance with
MIL-PRF-55310 .
Operating:
Method 105 of MIL-STD-202 , test condition C.
Resistance to soldering heat:
Method 210 of MIL-STD-202 , test condition E.
Moisture resistance:
Method 106 of MIL-STD-202 .
Terminal strength:
Method 211 of MIL-STD-202 , test condition C.
Applied force: 2 pounds each terminal for 10 seconds.
Bends: 5 at 45 degrees each.
Solderability:
Method 208 of MIL-STD-202 .
Resistance to solvents:
Method 215 of MIL-STD-202 .
Screening: In accordance with
MIL-PRF-55310 , class B or S, as applicable.
Part or Identifying Number (PIN): Consists of “M” prefix followed by specification sheet number, a dash and coded
alphas, and numeric number. See example:
EXAMPLE
M55310/26- B 02 A XXXXXXXX
M prefix and specification sheet number
Product level (S, B, or C)
Dash number (see table I)
Operating temperature range
(A, B, or C) (see table I)
Frequency