Q-Tech MILITARY TCXO User Manual
Q-tech, Analog tcxo, Description

1
Q-TECH Corporation - 10150 W. Jefferson Boulevard, Culver City 90232 - Tel: 310-836-7900 - Fax: 310-836-2157 - www.q-tech.com
ANALOG TCXO
DUAL-IN-LINE CRYSTAL OSCILLATORS
3.3 to 5Vdc - 10MHz to 80MHz
Analog TCXO (Revision D, December 2011 ) (ECO# 10367)
Q-TECH
CORPORATION
Description
The Q-Tech Analog TCXO encompasses state-of-the-art
oscillators with low phase noise, jitter, and tight temperature
stability. The TCXO is available in a DIP (QT3003), SMD
(QT3013) or Gull Wing (QT3023) package and as a square or
sine wave oscillator.
A flexible design allows Q-Tech Corporation to offer a
variety of choices of output standard, power and load.
Based on this flexibility, Q-Tech welcomes specifications
with parameters other than standard.
Low G-Sensitivity AT-Cut Crystal utilized in the design
allows to get 1PPB/G.
The reliable construction of this design qualifies it for
stringent environmental applications.
Features
• Made in the USA
• ECCN: EAR99
• DFARS 252-225-7014 Compliant:
Electronic Component Exemption
• USML Registration # M17677
• Available in both DIP and SMD packages
• Supply voltages 3.3Vdc and 5Vdc
• AT-Cut crystal
• Low Total Harmonic Distortion
• Low phase noise and Jitter
• Choice of output power and load
• All metal and hermetically sealed packages
• Custom design available tailored to meet customer’s needs
• Q-Tech does not use pure lead or pure tin in its products
• RoHS compliant
Applications
• Designed to meet today’s requirements for communication
systems.
• Wide military clock applications
• Control and measurement
• Signal processing
Ordering Information
For Non-Standard requirements, contact Q-Tech Corporation at
For custom load, supply voltage, output power, harmonic distortion, frequency
stability vs. temperature, and others not listed herein, please request a custom part
number.
Specifications subject to change without prior notice.
All packages are available in surface mount form.
Packaging Options
Other Options Available For An Additional Charge
• Standard packaging in black foam
• Optional anti-static plastic tube
• Hot Solder Dip Sn60/Pb40 per MIL-PRF 55310
• Lead forming available on all packages. Please contact for
details.
• P. I. N. D. test (MIL-STD 883, Method 2020)
• Lead trimming
• Phase Noise test (Static and under vibration)
• Jitter test
QT3013CXM-25.000MHz
Q T 3 0 1 3 C X M - 25.000MHz
Sample part number
Package Type:
0 = DIP-14
1 = SMD
2 = Gull Wing
Supply Voltage:
3 = +3.3V
5 = +5.0V
Output Frequency
Frequency vs. Temperature Code (*):
P
=
±
1ppm
at
0ºC
to
+70ºC
R
=
±
1ppm
at
-20ºC
to
+70ºC
W =
±
3ppm
at
-25ºC
to
+71ºC
X =
±
3ppm
at
-40ºC
to
+85ºC
Screening Option:
Blank = No Screening
M = Per MIL-PRF-55310, Level B
Logic:
C = HCMOS
S = Sine Wave
(*) Custom frequencies higher than 50MHz may require NRE