Q-Tech MILITARY TCXO - Manual (Page 5)

Q-TECH Corporation - 10150 W. Jefferson Boulevard, Culver City 90232 - Tel: 310-836-7900 - Fax: 310-836-2157 - www.q-tech.com
Q-TECH
CORPORATION
QPDS-0009 (Revision F, April 2013 ) (ECO# 10834)
HIGH STABILITY DIGITAL TCXO
SURFACE MOUNT CRYSTAL OSCILLATORS
3.3 to 5Vdc - 1MHz to 125MHz
5 of 7
Environmental Specifications
Q-Tech Standard Screening similar to (MIL-PRF-55310) is available. Q-Tech can also customize screening and test procedures to meet
your specific requirements. The packages are designed and processed to exceed the following test conditions:
Environmental Test Test Conditions
Temperature cycling MIL STD 883, Method 1010, Cond. B
Constant acceleration MIL STD 883, Method 2001, Cond. A, Y1
Seal Fine Leak MIL STD 883, Method 1014, Cond. A
Burn in 160 hours, 125°C with load
Aging 30 days, 70°C
Vibration sinusoidal MIL STD 202, Method 204, Cond. D
Shock, non operating MIL STD 202, Method 213, Cond. I
Thermal shock, non operating MIL STD 202, Method 107, Cond. B
Ambient pressure, non operating MIL STD 202, 105, Cond. C, 5 minutes dwell time minimum
Resistance to solder heat MIL STD 202, Method 210, Cond. C
Moisture resistance MIL STD 202, Method 106
Terminal strength MIL STD 202, Method 211, Cond. C
Resistance to solvents MIL STD 202, Method 215
Solderability MIL STD 202, Method 208
ESD Classification MIL STD 883, Method 3015, Class 1HBM 0 to 1,999V
Moisture Sensitivity Level J STD 020, MSL 1
Please contact Q-Tech for higher shock requirements
Frequency vs. Temperature Curve
Typical Stability of QT3103C-10.000MHz