Q-Tech QT78TD - Manual

AMSC N/A FSC 5955
INCH-POUND
MIL-PRF-55310/28C
15 October 2008
SUPERSEDING
MIL-PRF-55310/28B
13 June 2005
PERFORMANCE SPECIFICATION SHEET
OSCILLATOR, CRYSTAL CONTROLLED, TYPE 1 (CRYSTAL OSCILLATOR (XO)),
1.0 MHz THROUGH 85 MHz, HERMETIC SEAL, SQUARE WAVE, TTL
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
The requirements for acquiring the product described herein
shall consist of this specification sheet and
MIL-PRF-55310 .
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerances are ±.005 (0.13 mm) for three place decimals and ±.02 (0.5 mm) for
two place decimals.
FIGURE 1. Dimensions and configuration.
Pin number Function
1 Enable/disable
2 GND
3 Output
4 B+
Inches mm Ltr
Min Max Min Max
A N/A .560 N/A 14.22
B N/A .360 N/A 9.14
C .195 .205 4.95 5.21
D .086 .114 2.18 2.90
E .025 .055 .635 1.40
F N/A .378 N/A 9.60
G .292 .308 7.42 7.82
H .007 .009 .178 .229
J N/A .188 N/A 4.78
K .015 .021 .381 .533