SCANTECH ID (Champtek company) Pollux P-4010 - Manual (Page 18)

12 Installing the Pollux P-4010
Depending on the way you want to use the Pollux P-4010, the scanner can be
installed fixed on a counter surface
or sunk into the counter surface.
The Pollux can be installed in two different ways, scanner housing Landscape
or scanner housing Portrait (see the illustrations below). Refer to chapter 3 for
the various mounting options of the Pollux.
Independent from the installation you can direct the scan pattern in a way that
suits your application most, thanks to the four directional optical assembly. For
turning the optical assembly please refer to the Pollux Service Manual (autho-
rized personnel only).
POLLUX
Scanner Housing Landscape
POLLUX
Scanner Housing Portrait
Cable supply Cable supply
POLLUX
POLLUX
90/180/270
90/180/270
The turning of the optical assembly.
Note:The orientation of the scanner’s optical
assembly is factory assembled according to
your preference!
■ To make the instructions in this manual as clear as possible, the starting
point for all instructions is the landscape scanner housing setup.
IMPORTANT
Pollux_UserM_Deel1.qxd 14-11-2002 09:05 Pagina 12