SCANTECH ID (Champtek company) WD200 - Manual (Page 47)

5.12 Code 2 of 6 Parameters
A> Check Digit Transmission
Check Digit>
% 0 PN3
Calculate Check
Digit & Transmit
Calculate Check Digit
& Not Transmit
% 0 P N 7
% 0 P N 5
B> Set Up Code Length
To set the fixed length:
1. San the
“Begin“ label of the desired set.
2. Go to the Decimal Value Tables in Appendix A,
scan label(s) that represents the length to be
read.
3. Scan the
“Complete“ label of the desired set.
Repeat the steps 1 - 3 to set additional lengths.
44