SCANTECH ID (Champtek company) WD200 - Manual (Page 35)

5.6 IndustriaI 25 Parameters
A> Reading type
IATA25 Enable
%0H44
B Check Digit Transmission
Check Digit>
%0 H40
Calculate Check Digit
& Transmit
%0HN3
%0HN7
Calculate Check Digit
& Not Transmit
% 0 HN5
C> Set Up Code Length
To set the fixed length
1.
Scan the “Begin“ label of the desired set.
2. Go the Decimal Value Tables in Appendix A,
scan label(s) that represents the length to be
read.
3. Scan the
“Complete“ label of the desired set.
Repeat the steps 1 - 3 to set additional lengths.
32