SCANTECH ID (Champtek company) M-9030 User Manual

Page 34

Appendices

USB communication is not working.

• In case of KB emulation you can select

various ‘keyboard languages’ or the
universal ‘Alt-input-method’ (default). You
may want to try programming barcodes
from section 3.4 on the Configuration
Guide.

• In case of KB emulation in combination

with the Alt-input method, check that
Num-Lock of your keyboard is on.

• In MS-windows environment, verify with

the device manager that the HID (Human
Interface Device) is installed for the
scanner.

• Check that the scanner and the host

system both expect the same USB
protocol (KB emulation, RS232
emulation or IBM POS protocol). See the
Configuration Guide for setup codes and
reset the scanner after making any
changes. When using a standard-USB
cable, the scanner defaults to the USB
KB emulation protocol with ALT-method
character transmission. When using
USB plus power cable (with the green
connector), the scanner defaults to USB-
IBM-POS protocol for tabletop scanners.
These settings are restored after
programming “back to default” using the
Configuration Guide.