SCANTECH ID (Champtek company) M-9030 - Manual (Page 16)

Installation
10
USB (Product Number: 0114-SM04121) USB connector
Powered USB (Product Number: 0114-S804121)
Powered USB
connector
Getting connected
To connect Mica to your host system, follow the steps below:
1.
Open the cable cap of Mica.
2. Connect the desired interface cable to Mica.
3. Close the cable cap.
4. Connect the interface cable to your host system.
2.3 MOUNTING
To mount Mica, follow the steps below:
NOTE
Before fixing Mica to your host system, connect the desired interface
cable to Mica first (See section 2.2 Connecting).